Photo Capture Mode - Vivitar VIV-CV-1632 User Manual

Photo Capture Mode

The Photo Capture Mode allows you to capture photos with your digital camcorder.
To enter Photo Capture Mode, power on the camcorder and then press the MODE button once.
The Photo Capture icon appears on the LCD screen.
TAKING A PICTURE
1) Powering on Your Camera:
Flip open the LCD screen and press the POWER button to turn on the camera.
Video Capture Mode is the default mode that appears upon powering on your camera.
Press the MODE button once to enter the Photo Capture Mode.
The Photo Capture icon appears on the top left.
2) Selecting the Scene with the LCD Display:
While in Photo Capture Mode use the LCD display to direct the camcorder at the scene you
would like to capture.
NOTE: The amount of photos available to capture (as per the installed memory card size
and selected resolution) is shown on the top right of the LCD screen.
3) Digital Zoom Options:
Press the /- DOWN or / UP button to zoom in/out if desired.
You can magnify your subject up to 4 times using the Digital Zoom.
The zoom magnification is displayed on the bottom right of the LCD screen while zooming.
4) Capturing the Photo:
Press the SHUTTER or the OK button to take the picture.
The photo is automatically saved to the camera's Micro SD Memory Card.
NOTE: PHOTOGRAPHING TIPS
 Hold the telescope tightly with both hands. Make sure to keep your hands steady when
pressing the Shutter/OK button. If your hands move or shake while pressing the Shutter/OK
button, this may cause the pictures to be blurry.
 To ensure high quality pictures, it is recommended to use the tripod.
27