Keypad Models - DSC HS2016 User Manual

Chapter 2.0 Understanding your Keypad
11. Chime
12. OPEN
13. AC
14. System Trouble
15. Night
16. Ready Light (green)
17. Armed Light (red)
Note: For UL listed installations, zones can only be bypassed manually.

2.2 Keypad Models

Note: In the following list if x = 9 (the system operates in 912-919MHz), x=4 (the system operates
in 433MHz band) or x=8 (the system operates in 868MHz band). Only models operating in 912-
919MHz band are UL/ULC listed.
HS2LCD Alphanumeric LCD keypad
HS2LCDP Alphanumeric LCD keypad with Prox. Tag support
Icon keypad
HS2ICN
Icon keypad with Prox. Tag support
HS2ICNP
HS2LED LED keypad
HS2LCDRFx Alphanumeric LCD keypad with wireless receiver
HS2LCDRFPx Alphanumeric LCD keypad with wireless receiver and Prox. tag support
HS2ICNRFx Icon keypad with wireless receiver
Icon keypad with wireless receiver and Prox. tag support
HS2ICNRFPx
Wireless Alphanumeric LCD keypad
HS2LCDWFx
HS2LCDWFPx Wireless Alphanumeric LCD keypad with Prox. Tag support
HS2LCDWFPVx Wireless Alphanumeric LCD keypad with Prox. Tag support & Voice Promp
This icon turns on when the Chime function key is pressed to
enable Door Chime on the system. It will turn off when the chime
function key is pressed again to disable Door Chime.
This icon is used with clock digits 1 and 2 to indicate activated
zones (not alarm) on the system. When zones are opened, the
OPEN icon will turn on, and 7 segment displays 1 and 2 will scroll
through the violated zones.
Indicates that AC is present at the main panel.
Indicates that a system trouble is active.
Indicates that the panel is armed in the Night Mode.
If the Ready light is on, the system is ready for arming. If the
toggle of the Ready LED flashes for Force Arming enabled, the
LED flashes with force armable zones open on the partition.
If the Armed light is on, the system has been armed successfully.
- 6 -