Network - Yamaha AVENTAGE RX-A1060 Owner's Manual

HDMI OUT1, HDMI OUT2
Enables/disables the audio output from a TV connected to the HDMI OUT 1 jack or HDMI OUT
2 jack.
Settings
Off Disables the audio output from the TV.
On Enables the audio output from the TV.
Y
The HDMI OUT 1-2 jacks output 2-channel audio signals when the unit is turned on.
⬛
Standby Through
Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in
standby mode. If this function is set to "On" or "Auto", you can use the input selection keys (AV
1-7 and V-AUX) to select an HDMI input even when the unit is in standby mode (the standby
indicator on the unit blinks).
Settings
(This setting is available only when "HDMI Control" is set to "Off".)
Off
Does not output videos/audio to the TV.
Outputs videos/audio to the TV.
On
(The unit consumes more power than when "Off" is selected.)
Outputs videos/audio to the TV. If no signals are detected, the unit is set to the
Auto
power saving mode.

Network

Configures the network settings.
⬛
Network Connection
Selects the network connection method.
Settings
Select this option when you want to connect the unit to a network with a
Wired
commercially-available network cable (p.36).
Select this option when you want to connect the unit to a network via the
Wireless (Wi-Fi) wireless router (access point). For details on settings, see "Connecting the unit to
a wireless network" (p.49).
Select this option when you want to connect a mobile device to the unit directly.
Wireless Direct For details on settings, see "Connecting a mobile device to the unit directly
(Wireless Direct)" (p.54).
⬛
IP Address
Configures the network parameters (such as IP address).
DHCP
Select whether to use a DHCP server.
Settings
Does not use a DHCP server. Configure the network parameters manually. For
Off
details, see "Manual network settings".
Uses a DHCP server to automatically obtain the unit's network parameters (such
On
as IP address).
120
En