Hdmi - Yamaha AVENTAGE RX-A1060 Owner's Manual

Hide thumbs Also See for AVENTAGE RX-A1060:
Table of Contents

Advertisement

HDMI

Configures the HDMI settings.
HDMI Control
Enables/disables HDMI Control (p.153).
Settings
Off
Disables HDMI Control.
Enables HDMI Control.
On
Configure the settings in "TV Audio Input", "ARC" and "Standby Sync".
Y
To use HDMI control, you need to perform the HDMI Control link setup (p.153) after connecting HDMI
Control-compatible devices.
TV Audio Input
Selects an audio input jack of the unit to be used for TV audio input when "HDMI Control" is set
to "On". The unit's input source automatically switches to TV audio when the TV input is
switched to its built-in tuner.
Settings
AUDIO 1-3
Default
AUDIO 1
Y
When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for connecting an
external device because the input will be used for TV audio input.
ARC
Enables/disables ARC (p.155) when "HDMI Control" is set to "On".
Settings
Off
Disables ARC.
On
Enables ARC.
Y
You do not need to change this setting normally. In case noises are produced from the speakers connected to the
unit because TV audio signals input to the unit via ARC are not supported by the unit, set "ARC" to "Off" and use
the TV's speakers.
Standby Sync
Select whether to use HDMI control to link the standby behavior of the TV and the unit when
"HDMI Control" is set to "On".
Settings
Off
Does not set the unit to standby mode when the TV is turned off.
On
Sets the unit to standby mode when the TV is turned off.
Sets the unit to standby mode when the TV is turned off only when the unit is
Auto
receiving TV audio or HDMI signals.
Audio Output
Selects a device to output audio.
X
• The "Amp" and "HDMI OUT1" settings are available only when "HDMI Control" is set to "Off".
• The "HDMI OUT2" setting is available only when "HDMI OUT2 Assign" (p.125) is set to "Main".
Amp
Enables/disables the audio output from the speakers and headphones connected to the unit.
Settings
Off
Disables the audio output from the speakers and headphones.
On
Enables the audio output from the speakers and headphones.
119
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-v1081Rx-a1060

Table of Contents