Scene Menu Items - Yamaha AVENTAGE RX-A1060 Owner's Manual

4
Use the Cursor keys (q/w) to select an item and press ENTER.
5
Use the Cursor keys and ENTER to change the setting.
6
To exit from the menu, press ON SCREEN.

Scene menu items

Item
Save Registers the current settings in the selected scene.
Loads the settings registered for the selected scene. You can also
configure the SCENE link playback setting, select items to be
Load
included as the scene assignments, or view the settings currently
assigned to the selected scene.
Rename/Icon Select Changes the scene name and icon.
Reset Restores the default settings for the selected scene.
⬛
Save
Registers the unit's current settings (such as input source and sound program) in the selected
scene.
X
If you have changed the input assignment for a scene, you also need to change the external device assigned to the
corresponding SCENE key (p.59).
Function Page
103
103
104
104
En
⬛
Load
Loads the settings registered for the selected scene.
Select "DETAIL" to configure the SCENE link playback setting or view the scene assignments.
Device Control
Recalls a selected scene and starts its playback on an external device connected to the unit via
HDMI. (SCENE link playback)
Settings
Off Disables the SCENE link playback function.
Enables SCENE link playback using HDMI Control signals. Select this if an HDMI
HDMI Control Control-compatible device (such as a BD/DVD player) is connected to the unit via
HDMI. It also turns on the TV if it supports HDMI Control.
Default
SCENE1 (BD/DVD), SCENE2 (TV): HDMI Control
SCENE3 (NET), SCENE4 (RADIO), SCENE5-12: Off
Y
To control playback of an HDMI Control-compatible device by SCENE link playback, you need to set "HDMI
Control" in the "Setup" menu to "On" and perform the HDMI Control link setup (p.153).
103