Connecting Video Devices (Such As Bd/Dvd Players) - Yamaha AVENTAGE RX-A1060 Owner's Manual

⬛
Connecting another TV or a projector
The unit has two HDMI output jacks. If you connect another TV or a projector to the unit with
an HDMI cable, you can switch the TV (or projector) to be used for watching videos with the
remote control (p.57).
HDMI OUT 2 jack
HDMI OUT
(HDCP2.2)
2 1
The unit
(ZONE OUT)
ARC
(rear)
HDMI OUT
(HDCP2.2)
2 1 AV 1 AV 2
(ZONE OUT) ARC (1 BD/DVD)
AV 1 AV 2 AV 3 AV 4
MONITOR OUT/
(1 BD/DVD) Y
ZONE OUT
PHONO AUDIO 1 AUDIO 2 AUDIO 3
(2 TV)
A
Y
AV
ZONE OUT
L
R
ZONE 2
1 2 3 4 5 6 FRONT
GND OPTICAL OPTICAL COAXIAL COAXIAL COAXIAL OPTICAL
SURROUND
R L
ANTENNA
(4 RADIO)
FM AM
75
TV (already connected)
Y
• HDMI Control is not available on the HDMI OUT 2 jack.
• If you set "HDMI OUT2 Assign" (p.125) in the "Setup" menu to "Zone2", you can connect a video monitor for
Zone2 to the HDMI OUT 2 jack and enjoy videos and audio using the video monitor (p.86).
TV
HDMI
HDMI input
HDMI
Projector
En

Connecting video devices (such as BD/DVD players)

Connect video devices such as BD/DVD players, set-top boxes (STBs) and game consoles to the
unit. Depending on the video/audio output jacks available on your video device, choose one of
the following connections. We recommend using an HDMI connection if the video device has
an HDMI output jack.
Y
• Videos input to the unit via HDMI cannot be output to a TV connected to the unit with a cable other than HDMI.
For details, refer to "Video signal flow" (p.151).
• The following explanation is based on the assumption that you have not changed the "Input Assignment"
setting (p.126) in the "Setup" menu. As necessary, you can assign the COMPONENT VIDEO (�� ,�� ,�� ), COAXIAL
(③, ④, ⑤) and OPTICAL (①, ②, ⑥) jacks to another input source.
X
If you make more than one audio connection for one input source, an audio signal played back on the unit will be
determined according to the "Audio Select" setting (p.98) in the "Option" menu.
⬛
HDMI connection
Connect a video device to the unit with an HDMI cable.
HDMI (AV 1-7) jacks
The unit (rear)
HDMI (HDCP2.2)
I OUT
CP2.2)
AV 1 AV 2 AV 3 AV 4 AV 5 AV 6 AV 7
1
ARC (1 BD/DVD)
AV 3 AV 4 COMPONENT VIDEO TRIGGER
MONITOR OUT/ P P Y P P
Y B R AV 2 B R OUT
ZONE OUT
B
1
REMOTE
12V 0.1A
IN
MAX. TOTAL
2
A C
Y AV 1 P B P R Y AV 3 P B P R
ZONE OUT PRE OUT (SINGLE)
1
2
ZONE 2 FRONT SURROUND SUR. BACK SUBWOOFER CENTER
6 OPTICAL
SPEAKERS
SURROUND SURROUND BACK F.PRESENCE
R L R L R L
EXTRA SP2 EXTRA SP1
SINGLE
ZONE 2 ZONE 2/BI-AMP
If you select the input source by pressing AV 1-7 on the remote control, the video/audio played
back on the video device will be output from the unit.
31
NE
OUT HDMI output
HDMI
HDMI
HDMI
CENTER
Video device