Tighten right axle clamping
screws 1 to specified tight-
ening torque.
Pinch bolt on quick-re-
lease axle
Tightening sequence: Tighten
the screws 6 times, alternating
between one and the other
each time
14 lb/ft (19 Nm)
Removing rear wheel
Make sure ground is level and
firm and place motorcycle on a
suitable auxiliary stand.
with center stand
OE
Place motorcycle on center
stand, ensuring that it is rest-
ing on a firm and level support
surface.
Remove the screw 1 and take
the pulse sensor out of the
bore hole.
Remove axle nut 2.
9
123
z