BMW F 800 GS Rider's Manual page 112

9
110
Front brake-pad wear
limit
min 0.04 in (min 1.0 mm)
z
(Only friction material without
carrier plate. The wear mark-
ings, i.e. the grooves, must be
clearly visible.)
If the wear indicators are no
longer clearly visible:
WARNING
Dropping below the minimum
pad thickness.
Reduced braking action. Damage
to the brake.
In order to ensure the operat-
ing reliability of the brake sys-
tem, make sure that the brake
pads are not worn beyond their
minimum thickness.
Have the brake pads replaced
at an authorized service facil-
ity, preferably an authorized
BMW Motorrad dealer.
Check rear brake pad
thickness
Make sure ground is level and
firm and park motorcycle.
Conduct a visual inspection of
the brake pad thickness. Direc-
tion of view: from rear at brake
caliper 1.
Rear brake-pad wear
limit
min 0.04 in (min 1.0 mm)
(Only friction material without
carrier plate.)
If brake pads are worn:
WARNING
Dropping below the minimum
pad thickness.