9
122
If they have been tightened,
loosen right-hand axle clamping
screws 1 again.
Remove front wheel stand.
z
without center stand
Remove auxiliary stand.
Place right-hand brake caliper
on brake disk.
Tighten screws 2 to the speci-
fied tightening torque.
Brake caliper on tele-
scopic forks
OE
28 lb/ft (38 Nm)
Insert ABS sensor in its socket
and install screw 1.
Remove adhesive tape from
wheel rim.
Operate brakes several times
until brake pads contact brake
disk.
Firmly compress the spring
forks several times.