9
120
Remove spacing bushing 5 on
left side from wheel hub.
Installing front wheel
z
WARNING
Use of a wheel which does
not comply with series speci-
fications.
Malfunctions during control inter-
ventions by ABS and ASC/.
Please see the information on
the effect of wheel sizes on the
ABS and ASC chassis control
systems at the beginning of
this chapter.
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque.
Damage or loosening of screwed
connections.
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Mount spacing bushing 5 on
left side on wheel hub.
ATTENTION
Front wheel installation op-
posite the running direction.
Accident hazard
Observe running direction ar-
rows on tire or rim.
Roll front wheel into front
suspension while guiding brake
disk between brake pads of
left-hand brake caliper.
Lift front wheel and insert
axle 4 as far as possible.
Tighten right-hand axle clamp-
ing screws 1 with specified