Diagnostics Mode; Diagnostics Menus - Lexmark X792 Service Manual

7562

Diagnostics mode

To run the printer diagnostic tests described in this chapter, enter Diagnostics mode.
1.
Turn off the printer.
2.
Press and hold 3 and 6.
3.
Turn on the printer.
4.
Hold the buttons until the splash screen appears.

Diagnostics menus

Dual Diode Adjust
Black
Cyan
Magenta
Yellow
Diode Alignment Page
REGISTRATION
Top Margin
Bottom Margin
Left Margin
Right Margin
Quick Test
Alignment Menu
Cyan
Yellow
Magenta
Factory Scanner
Factory Manual
Drift Sensors
SCANNER CALIBRATION
Copy Quick Test
Adjust Calibration Values
Reset Calibration Values
MISC TESTS
Toggle ITU
Printhead Inst
Auto Detect
PRINT TESTS
Tray 1
3-8
Service Manual
See "DUAL DIODE ADJUST" on page
See "REGISTRATION" on page
See "Quick Test" on page
See "Alignment Menu" on page
See "Drift Sensors" on page
See "SCANNER CALIBRATION" on page
See "Toggle ITU" on page
See "Printhead Inst" on page
See "Auto Detect" on page
See "PRINT TESTS" on page
3-10.
3-11.
3-11.
3-12.
3-13.
3-14.
3-14.
3-14.
3-14.
3-14.