Diagnostics Menu; Entering Diagnostics Mode - Lexmark CS310 Service Manual

Solid green
Blinking red
Sleep button light
Off
Solid amber
Blinking amber
Blinking amber for 0.1 second, then goes completely off for 1.9
seconds in pulsing pattern.

Diagnostics menu

•
"Entering diagnostics mode" on page 166
•
"REGISTRATION" on page 167
• "Skew" on page 168
•
"Quick Test" on page 168
•
"Alignment Menu" on page 169
• "MISC TESTS" on page 170
•
"PRINT TESTS" on page 171
•
"Feed Tests" on page 171
• "Print quality test pages" on page 172
•
"HARDWARE TESTS" on page 172
•
"DUPLEX TESTS" on page 173
• "INPUT TRAY TESTS" on page 176
•
"BASE SENSOR TEST" on page 176
•
"DEVICE TESTS" on page 177
• "PRINTER SETUP" on page 178
•
"EP SETUP" on page 181
•
"TPS Setup: Right or Left" on page 181
• "TPS Setup: Reset Color Cal" on page 182
•
"TPS Setup: Cal Ref Adj" on page 182
•
"REPORTS" on page 182
• "EVENT LOG" on page 183
•
"Exit Diagnostics" on page 184

Entering diagnostics mode

For CS310 models:
1
Turn off the printer.
2
Press and hold Left and OK.
The printer is on, but idle.
The printer requires user intervention.
Service menus
Printer status
The printer is idle or in Ready state.
The printer is in Sleep mode.
The printer is waking from entering hibernation mode.
The printer is in hibernation mode.
166
5027