BKI BLG Operation Manual page 24

Gas Pressure Fryer
STEP
1 Press the FILTER/OFF/FRY switch to
FRY.
2 Press PROG on the keypad.
3 Input 1724 and press ENTER.
4 Select the program product number (1-8).
5 Press ENTER.
6 Press TOGGLE/CLEAR and input the
number of minutes you want to cook.
7 Press ENTER.
8 Press TOGGLE/CLEAR and input the
cooking temperature for product to be
cooked.
9 Press ENTER.
10 Press TOGGLE/CLEAR until the desired
option is displayed.
11 Press ENTER.
12 Press TOGGLE/CLEAR until the desired
option is displayed.
Table 2. Product Programming Procedure
ACTION DISPLAY
LOW
PROGRAM CODE
PROGRAM
PRODUCT #
PROGRAM
PRODUCT X
PROGRAM TIME1
00:00
PROGRAM TIME1
XX:XX
PROGRAM TEMP1
000 °F
PROGRAM TEMP1
XXX °F
PROGRAM
TEMPCOM1
FLEX TIME
PROGRAM
TEMPCOM1
X
PROGRAM VALVE1
CLOSED
PROGRAM VALVE1
X
21
Operation
COMMENTS
X refers to the program number
you selected.
This command allows you to
specify the cooking time for this
stage. The time displayed may be
a previously programmed value.
XX:XX refers to the number of
minutes you input.
This command allows you to
specify the cooking temperature
for this stage. The temperature
displayed may be a previously
programmed temperature. The
temperature scale may also
display °C depending on the
system option that is set.
XXX refers to the cooking
temperature you input.
This command enables you to
select whether or not time is
allowed for the fryer to recover
from temperature loss while
cooking during this stage. The
FLEX TIME option will allow the
fryer to recover from temperature
loss.
X refers to the temperature
compensation option selected.
This command allows you to
specify whether the solenoid
valve will be open or closed
during this stage.
X refers to the solenoid valve
option selected. OPEN is used for
Models ALF and BLF Automatic
Lift fryers. If your program
requires the solenoid valve to be
closed while cooking, choose the
CLOSED option.