Venting/Air Piping - General - Freestyle 80 Manual

®
W
FreeStyle
ALL
6 Venting/air piping — general
Do not install the
mon vent with any other appliance. This will
resulting in possible severe personal injury, death
or substantial property damage.
Existing common vent systems may be too large
existing boiler is removed.
flue gas spillage and carbon monoxide emissions,
causing severe personal injury or death.
When removing a boiler from an
existing common vent system
®
FreeStyle
The
. When an existing boiler is replaced with
a FreeStyle® boiler, the FreeStyle
existing common vent. The
vent and air piping, as specified in this manual. This may cause a
old common vent system.
on the original common vent system. Operate each appliance
will test whether the common vent system can properly vent
each appliance.
Existing vent test procedure
(The following is intended to test whether the appliances
remaining on an existing vent system will operate
satisfactorily.)
1. Seal any unused openings in the common venting system.
2.
zontal pitch and determine there is no blockage or restriction,
leakage, corrosion or other deficiencies which could cause an
3.
ing doors and windows and all doors between the space in
which the appliances remaining connected to the common
Turn on clothes dryers and any appliance not connected to
as range hoods and bathroom exhausts, so they will operate
Close fireplace dampers.
4. Place in operation the appliance being inspected. Follow the
operate continuously.
Part number 550-142-850/0716
M -
OUNT GAS FIRED WATER BOILER
®
FreeStyle boiler into a com-
®
®
FreeStyle boiler requires its own
appliance remaining
—
Boiler Manual
5.
6.
ing connected to the common venting system properly
vents when tested as outlined herein, return doors, win-
re-sizing to approach the minimum size as determined using
-
-
-
17