•
When the BioClip function is used, it is very important that
the mowing interval is not too long.
WARNING! Do not use the machine on
!
ground that slopes more than 10° ° ° ° . . . . Mow
slopes upwards and downwards, never
across. Avoid sudden changes in direction.
Starting on a slope, manual gearbox.
(Rider 11 R and Rider 11 C).
1 Press down the parking brake pedal.
2 Push the throttle control to full throttle position.
3 Disengage the engine and select 1st gear.
4 Gradually release the clutch pedal.
5 When the engine starts to pull, release the parking brake.
Stop the engine
Preferably allow the engine to idle for a minute to obtain
normal working temperature before stopping it if it has been
working hard. Avoid idling the engine for long periods, as
there is a risk of carbon build-up on the spark plugs.
1 Lift up the cutting unit by pulling the lever backwards to its
locked position.
2 For Rider 11 R and Rider 11 C Pull back the throttle and
move the gear shift lever to the neutral position "N",
without pressing in the reversing lock button. Turn the
ignition key to the "STOP".
18 –
English
Driving
For Rider 13 C, Rider 16 AWD and Rider 16 C Pull back
the throttle and turn the ignition key to the "STOP"
position.
3 When the Rider is at a standstill, press down the parking
brake and push in the locking button.