Turn And Lane-Change; Signals; Fog Lamps - Chevrolet cruze 2017 Owner's Manual

162 Lighting

Turn and Lane-Change

Signals

Move the lever all the way up or
down to signal a turn.
An arrow on the instrument cluster
will flash in the direction of the turn
or lane change.
Raise or lower the lever until the
arrow starts to flash to signal a lane
change. Hold it there until the lane
change is complete. If the lever is
moved momentarily to the lane
change position, the arrow will flash
three times.
The lever returns to its starting
position when it is released.
If after signaling a turn or lane
change, the arrow flashes rapidly or
does not come on, a signal bulb
may be burned out.
Have any burned out bulbs
replaced. If a bulb is not burned out,
check the fuse. See Instrument
Panel Fuse Block 0 298.

Fog Lamps

If equipped with front fog lamps, the
button is on the exterior lamp
control, on the outboard side of the
steering wheel.
To turn on the fog lamps, the ignition
must be on and the exterior lamp
;
control must be in or
9
: Press to turn the fog lamps on
or off. An indicator light on the
instrument cluster comes on when
the fog lamps are on.
Some localities have laws that
require the headlamps to be on
along with the fog lamps.
5
.