Parking Brake; Pedal Apply - Chevrolet cruze 2017 Owner's Manual

234 Driving and Operating

Parking Brake

Lever Apply
With the brake pedal applied, pull
up firmly on the parking brake
handle without pressing the release
button. See Shifting Into Park 0 219
or Parking 0 221. If the ignition is in
the ON/RUN position, the brake
system warning light will come on.
See Brake System Warning
Light 0 128.
To release the parking brake:
1. Hold the brake pedal down.
2. Pull the parking brake handle
up until you can press the
release button.
3. Hold the release button in as
you move the brake handle all
the way down.
Caution
Driving with the parking brake on
can overheat the brake system
and cause premature wear or
damage to brake system parts.
Make sure that the parking brake
is fully released and the brake
warning light is off before driving.
Driving with the parking brake
applied will cause a warning chime
to sound and the RELEASE
PARKING BRAKE message to
appear in the DIC. The message will
remain on until the parking brake is
released or the vehicle is stopped.

Pedal Apply

With the brake pedal applied,
push the parking brake pedal down.
See Shifting Into Park 0 219 or
Parking 0 221.
If the ignition is on, the brake
system warning light will come on.
See Brake System Warning
Light 0 128.