Table of Contents

Advertisement

266
Vehicle Care
Keep a record with all parts receipts
and list the mileage and the date of
any service work performed. See
Maintenance Records 0 364.
Caution
Even small amounts of
contamination can cause damage
to vehicle systems. Do not allow
contaminants to contact the fluids,
reservoir caps, or dipsticks.

Hood

To open the hood:
1. Open the driver side door and
pull the hood release handle.
It is on the lower left side of the
instrument panel between the
door and the steering wheel.
2. Release the handle, then pull
the handle again to fully open
the hood.
3. Go to the front of the vehicle
and lift the hood and release
the hood prop from its retainer,
located above the radiator.
Securely place the hood prop
into the slot on the underside of
the hood.
To close the hood:
1. Before closing the hood, be
sure all the filler caps are
properly installed.
2. Lift the hood to relieve
pressure on the hood prop.
Remove the hood prop from
the slot on the underside of the
hood and return the prop to its
retainer. The prop rod must
click into place when returning
it to the retainer to prevent
hood damage.
3. Lower the hood 30 cm (12 in)
above the vehicle and release
it so it fully latches.
4. Check to make sure the hood
is closed. If not, release the
hood from inside and repeat
Steps 1 3.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents