Lamps - Chevrolet cruze 2017 Owner's Manual

Turn Signal Lamp
1. Open the hood. See
Hood 0 266.
2. For the driver side bulb,
remove the windshield washer
bottle filler neck by firmly
pulling it straight up and out of
the bottle.
3. Remove the bulb socket by
turning counterclockwise.
4. Remove the bulb from the
socket by pulling it straight out.
5. Install the new bulb by pushing
it into the bulb socket.
6. Install the bulb socket to the
headlamp assembly by turning
clockwise.
7. For the driver side, reinstall the
windshield washer bottle filler
neck by firmly pushing it
straight into the bottle and
re-attaching it to the tie bar.
Taillamps and Back-Up

Lamps

Decklid Back-Up Lamp and
Taillamp
1. Back-Up Lamp
2. Taillamp
Vehicle Care
1. Open the trunk.
2. Remove and retain the
pushpins securing the flocking.
Pull back the flocking to
expose the bulb sockets.
3. Remove the bulb socket by
turning counterclockwise and
pulling it straight out.
4. Remove the bulb from the
socket by pulling it straight out.
5. Install the new bulb in the bulb
socket.
6. Install the bulb socket by
turning clockwise.
7. Push the flocking back into
place and secure with the
retained pushpins.
291