Chevrolet cruze 2017 Owner's Manual page 291

290 Vehicle Care
Headlamps and Front
Turn Signal
Base Level Assembly
1. Turn Signal Lamp
2. High-Beam Headlamp
3. Low-Beam Headlamp
Uplevel Assembly
For the uplevel assembly, only the
turn signal lamp is replaceable.
High-Beam Headlamp/
Low-Beam Headlamp
1. Open the hood. See
Hood 0 266.
2. For the driver side bulb,
remove the windshield washer
bottle filler neck by unclipping it
from the tie bar and firmly
pulling it straight up and out of
the bottle.
3. For the passenger side,
disengage the air cleaner, and
push it aside to allow easier
access to the bulb cover.
4. Remove the bulb cover by
turning counterclockwise.
5. Remove the bulb socket from
the headlamp assembly by
turning counterclockwise.
6. Remove the bulb socket from
the plug connector.
7. Attach the new bulb socket to
the plug connector.
8. Install the bulb socket from the
headlamp assembly by turning
clockwise.
9. Install the bulb cover by turning
clockwise.
10. For the driver side, reinstall the
windshield washer bottle filler
neck by firmly pushing it
straight into the bottle and
re-attaching it to the tie bar.