Canceling the Transmission
0.
Canceling memory transmission job
You can cancel the memory transmission during scanning.
When using the original glass
This section describes how to cancel the memory transmission when an original is placed on the
original glass.
When scanning is completed, the confirmation screen for the next original is
1
displayed. Press [Job Cancel].
If you leave the screen unattended for a period of the auto clearance setting time (45 sec. by
default) after the confirmation screen for the next original is displayed, a copy of the scanned
originals is sent.
The confirmation screen is displayed. Press [Yes].
2
Canceling the Transmission 57