Playback Point Operation Area; [Hdd] Tab - Panasonic WJ-ND400K Setup Instructions

[ALM] button
: Indicates an event occurrence. The alarm
action will be canceled by clicking this but-
ton. (Refer to the operating instructions
(PDF).)
[ERR] button
: Indicates an error occurrence. The error
action will be canceled by clicking this but-
ton. Refer to the operating instructions (PDF)
for further information.

Playback point operation area

q Indicates the start time and the end time of
recorded images to be downloaded.
[Start]: Designate the start time from when record-
ed images are to be downloaded.
[End]: Designate the end time till when recorded
images are to be downloaded.

[HDD] tab

q [REW] button
Plays recorded images in reverse at high speed.
Playback speed of fast reverse playback will change
in the following order each time this button is
clicked: Step2 (Approx. 4x) → Step3 (Approx. 8x) →
Step4 (Approx. 16x) → Step5 (Approx. 32x) →
Step6 (Approx. 48x) → Step7 (Approx. 96x)
22
q
q w e r t
u i o !0
Note:
• Once an emergency recording starts, it will not stop
even by clicking the [ALM] button. It will stop only
when "Continue" is selected for "Recording dura-
tion" on the "Emergency rec." page.
w
w [Go to date]
Designate the desired time and date from when
playback of recorded images is to start.
e [Go to last]
Click this button to skip to the latest recorded image
from the camera channel currently being displayed
and start playback.
y !1
w [PREV RECORD] button
Skips to the previous recorded image and plays it.
e [REV PLAY] button
Plays recorded images in reverse.
e
!2