Download Operation Area; [Cam] Tab - Panasonic WJ-NV200K Operating Instructions Manual

Download operation area

[Start]/[End] setup
Specify the time range for downloading images
and audio by setting a start and end time. This
operation on a 1-screen is available only during
playback.
[Download] button
Downloads recorded images and audio at the
designated time and date.

[CAM] tab

When displaying live images from a camera with the panning/tilting function, the following camera controls are
available. Depending on the model of the camera, some operations may not work.
[Zoom] box
Zooming can be adjusted by clicking the [–] button
(wide) or the [+] button (tele). Click the [x1] button to
reset zoom.
[Focus] box
Focusing can be adjusted by clicking the [Near] but-
ton or the [Far] button. The auto focus function can
be performed by clicking the [Auto] button.
[Auto mode] box
Activate the designated auto function of the camera.
Select the auto mode function (auto track, auto pan,
preset sequence, or patrol) of the camera by clicking
the [C] button, and then click the [Start] button. Click
the [Stop] button to stop the auto mode function.
Control pad/buttons
[Start]/[End] setup
[Viewer] button
Download the viewer software for playing the
downloaded images and audio.
Clicking the buttons around the control pad can move
(pan/tilt) a camera in the clicked direction. Clicking
inside the control pad also can adjust the vertical/hor-
izontal position (pan/tilt) of the displayed images.
Panning/ tilting speed will be faster if a clicked point
gets farther from the center point of the control pad.
[Brightness] box
The brightness (lens iris) can be adjusted by clicking
the [–] (darker) button or the [+] (brighter) button. It is
possible to reset the adjusted brightness by clicking
the [Reset] button.
62