Playback Point Operation Area; [Hdd] Tab - Panasonic WJ-ND400K/G Operating Instructions Manual

[ALM] button
: Indicates an event occurrence. The alarm
action will be canceled by clicking this button.
(page 37)
[ERR] button
: Indicates an error occurrence. The error
action will be canceled by clicking this button.
(page 38)

Playback point operation area

q Indicates the start time and the end time of
recorded images to be downloaded. (page 47)
[Start]: Designate the start time from when record-
ed images are to be downloaded.
[End]: Designate the end time till when recorded
images are to be downloaded.

[HDD] tab

q [REW] button
Plays recorded images in reverse at high speed.
Playback speed of fast reverse playback will be
changed in the following order each time this button
is clicked: Step2 (Approx. 4x) → Step3 (Approx. 8x)
→ Step4 (Approx. 16x) → Step5 (Approx. 32x) →
Step6 (Approx. 48x) → Step7 (Approx. 96x)
q
q w e r t
u i o !0
Note:
• Once an emergency recording starts, it will not stop
even by clicking the [ALM] button. It will stop only
when "Continue" is selected for "Recording duration"
on the "Emergency rec." page. Refer to the setup
instructions (PDF) for further information about the
"Emergency rec." page.
w
w [Go to date]
Designate the desired time and date from when
playback of recorded images is to start. (page 23)
e [Go to last]
Click this button to skip to a point that is the start
time of the latest recorded image from the camera
channel currently being displayed and start play-
back.
y !1
w [PREV RECORD] button
Skips to the previous recorded image and plays it.
e [REV PLAY] button
Plays recorded images in reverse.
e
!2
15