[Control] Button - Panasonic WJ-ND400K Setup Instructions

[Control] button

The following operation panel will be displayed when
the [Control] button is clicked.
q
w
r
q [Multiscreen select] box
Images from up to 4 cameras can be displayed
simultaneously on a multi-screen. Each time the
button is clicked, images from the 4 cameras regis-
tered as a group in advance will be displayed on a
4-screen. (Page 51)
w [Sequence] box
When this button is clicked, the camera channels
will be switched automatically and images from
them will be displayed sequentially according to the
settings configured in advance. The indicator on the
button will light (green) during sequence display.
(Page 55)
18
e [EL-zoom] box
Camera images will be displayed in the proportion
of the clicked zoom ratio button.
: 1x
: 2x
: 4x
e r [Search] box
[Search] button
Use this button to search the recorded images.
t
Search results will be displayed in list form in the list
display area.
y
(Refer to the operating instructions (PDF).)
[Area select] button
Use this button to select a disk on which recorded
images are to be played/searched.(Refer to the
operating instructions (PDF).)
t [Copy] box
The "Data copy" window will be displayed by click-
u
ing this button. Copying recorded images onto the
copy area of the hard disk drive can be performed
on the "Data copy" window.
y [Log] box
Logs will be displayed in list form in the list display
area.
[Error log] button
The error logs will be in list form in the list display
area.
[Access log] button
i
The time and date when logged in/out of the record-
er, the user name, and the IP address will be dis-
played. The access logs will be displayed in list form
in the list display area.
[Event log] button
The time and date of event occurrences and their
details will be displayed. The event logs will be dis-
played in list form in the list display area.
[Network log] button
The network logs will be displayed in list form in the
list display area.