1. Projection (× 2)
2. Seat holder
To install the seat
Insert the projections on the front of the
seat into the seat holder, push the rear
of the seat down to lock it in place, and
then remove the key.
NOTE:
@
Make sure that the seat is properly se-
cured before riding.
@
INSTRUMENT AND CONTROL FUNCTIONS
1. Helmet holder
Helmet holder
The helmet holder is located under the
seat.
To secure a helmet to the helmet
holder
1. Remove the seat. (See page 3-11
for removal and installation proce-
dures.)
2. Attach the helmet to the helmet
holder, and then securely install
the seat.
3-12
WARNING
@
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of
control and possibly an accident.
@
To release the helmet from the
helmet holder
Remove the seat, remove the helmet
EAU00263
from the helmet holder, and then install
the seat.
EW000030
3