Replacing The Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb - Yamaha diversion 900 XJ900S Owner's Manual

1. Do not touch this area.
3. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
CAUTION:
_
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with
alcohol or thinner.
_
4. Install the headlight bulb cover,
and then connect the coupler.
5. Have a Yamaha dealer adjust the
headlight beam if necessary.
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Screw (× 2)
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
EC000105
removing the screws.
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
CAUTION:
_
Do not overtighten the screws, oth-
erwise the lens may break.
_
6-32
1. Screw
EAU01623
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
EC000108
CAUTION:
_
Do not overtighten the screw, other-
wise the lens may break.
_
EAU03497
6
ECA00065