Rear Wheel - Yamaha diversion 900 XJ900S Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Rear wheel axle pinch bolt

Rear wheel

To remove the rear wheel
6
WARNING
_
G
It is advisable to have a Yamaha
dealer service the wheel.
G Securely support the motor-
cycle so that there is no danger
of it falling over.
_
1. Axle nut
1. Remove the axle nut, and then
EAU04361
loosen the rear wheel axle pinch
bolt.
2. Place the motorcycle on the cen-
EW000122
terstand.
1. Nut
2. Bolt
3. Brake torque rod
4. Cotter pin
5. Brake caliper bracket
6. Bolt (× 2)
3. Remove the brake caliper by re-
4. Disconnect the brake torque rod
5. While supporting the rear wheel,
6. Remove the brake caliper bracket
7. Pull the wheel to the right to sepa-
6-35
moving the bolts.
from the brake caliper bracket by
removing the cotter pin, the nut,
and the bolt.
pull the wheel axle out.
and spacer.
rate it from the final gear case, and
then remove it.