Rear Shock Absorber Adjustment - Yamaha WARRIOR YFM350X Owner's Manual

1. Adjusting ring
a. Increase spring preload
b. Decrease spring preload
1. Bague de réglage
a. Augmente la précontrainte du ressort.
b. Diminue la précontrainte du ressort.
1. Anillo de ajuste
a. Aumenta la precarga del muelle
b. Disminuya la precarga del muelle

Rear shock absorber adjustment

The spring preload and damping force of the
rear shock absorber can be adjusted to suit the
rider's weight and riding conditions.
This shock absorber contains highly pressurized
nitrogen gas. Read and understand the following
information before handling the shock absorber.
2. Locknut
2. Contre-écrou
2. Contratuerca
4-31
WARNING
1. Do not tamper with or attempt to open
the cylinder assembly.
2. Do not subject the shock absorber to an
open flame or other high heat source.
This may cause the unit to explode due to
excessive gas pressure.
3. Do not deform or damage the cylinder in
any way. Cylinder damage will result in
poor damping performance.
4. Take the shock absorber to a Yamaha
dealer for any service.
1. Adjust spring preload as follows.
a. Loosen the locknut.
b. Turn the adjusting ring in direction a to
increase the spring preload and in direc-
tion b to decrease the spring preload.
EBU00743