Yamaha WARRIOR YFM350X Owner's Manual page 258

1. Drain bolt
3. Compression spring
1. Boulon de vidange
3. Ressort de compression
1. Perno de vaciado
3. Muelle de compresión
2. O-ring
4. Oil strainer
2. Joint torique
4. Crépine à huile
2. Junta tórica
4. Tamiz de aceite
Engine oil replacement and oil filter element
cleaning
1. Place the ATV on a level surface.
2. Warm up the engine for several minutes,
and then stop it.
3. Place a container under the engine.
4. Remove the dipstick, and then remove the
drain bolt to drain the oil.
CAUTION:
When removing the drain bolt, the compres-
sion spring, oil strainer and O-ring will fall out.
Take care not to lose these parts.
8-17