Tighten Them - NordicTrack NETL29716.0 User Manual

5. Attach the Tray (79) to the left and right Tray
Brackets (76) with four #8 x 3/4" Truss Head
Screw (24); start all four Truss Head Screws,
and then tighten them. Make sure that no
wires are pinched.
6. Connect the two fan wires (D). The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Next, insert the connectors through the looped
tie (C) as shown. Then, pull the tie tight and cut
off the excess tie.
7. Attach the two Handrails (74) to the left and right
Uprights (84) with two of the 5/16" x 3" Screws
(88) and the two of the 5/16" Star Washers (8)
that you removed in step 3; do not fully tighten
the Screws yet. Be careful not to pinch the
Upright Wire (83) or the fan wire (A). Position
the wires in the cutouts as shown.
Then, remove and discard the two indicated
screws (D).
5
76
24
Front View
6
Bottom
View
7
88
8
74
E
A
84
9
79
76
24
D
C
74
88
8
E
84
83