Tighten Them - NordicTrack NETL29716.0 User Manual

10. With the help of a second person, hold the con-
sole assembly (F) near the Handrails (74).
Connect the ground wire (L) from the console
assembly (F) to the Console Ground Wire (152)
on the Pulse Crossbar (80).
See the inset drawing. Connect the Upright
Wire (83) to the console wire (H). The connec-
tors should slide together easily and snap
into place. If they do not, turn one connector
and try again. IF YOU DO NOT CONNECT THE
CONNECTORS PROPERLY, THE CONSOLE
MAY BECOME DAMAGED WHEN YOU TURN
ON THE POWER.
Next, connect the two fan wires (not shown) on
the left side.
11. Attach the console assembly (F) to the Handrails
(74) with four 5/16" x 2" Screws (2) and four
5/16" Star Washers (8); start all four Screws,
and then tighten them. Be careful not to
pinch the wires. Note: The wires should be
positioned between the Handrails and the
plastic console assembly.
Then, insert the wires (D) upward into the con-
sole assembly (F).
10
F
H
83
74
11
74
D
8
2
11
L
152
80
H
83
F
D
8
2
74