NordicTrack NETL29716.0 User Manual page 14

16. Press the two tabs on the Tablet Holder (16) into
the slots (K) in the console assembly (F).
Attach the Tablet Holder (16) with four #8 x 5/8"
Machine Screws (108). Note: Start the two top
Machine Screws first, and then start the two
bottom Machine Screws. Be careful not to
overtighten the Machine Screws.
IMPORTANT: The Tablet Holder (16) is
designed for use with most full-size tablets.
Do not place any other electronic device or
object in the Tablet Holder.
17. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see pages 33 and 34). Note: Extra parts may be
included.
16
Start First
108
14
16
F
K