Table of Contents
Advertisement
This function prohibits transmission as long as there is a signal on the receiving frequency.
The default is BCLO-OFF, which is the off position. By activating this function, the radio
transmits only when:
1. No signal is received (BUSY icon is gone) on the receiving frequency.
2. The tone-squelch is not opened by receiving the corresponding CTCSS tone.
3. As above, with DCS code.
therwise a beep sound and the unit does not transmit even when the PTT is pressed.
1.
Press and hold FUNC key to enter the set
mode. Press dial to select menu 26.
Factory default setting is [OFF].
2.
Rotate either left or right dial you wish to
set the BCLO feature. BCLO can be set
separately in VFOs, but not for each
band.
3.
Press any key to set and exit, or press the
dial or UP/DOWN keys to set and move to
another menu.
Set mode menu
BCL-OF
BCL-ON
51
Advertisement
Table of Contents
