Bell; Busy-Channel-Lock-Out (Bclo); Theft Alarm - Alinco DR-635T Instruction Manual

Bell

The bell informs you that you are being called by sounding a bell, and flashing the bell icon on the
display.
1.
[BELL OFF] icon appears on the display.
2.
By rotating the main dial, the display changes as
shown and the Bell function setting is changed.

Busy-Channel-Lock-Out (BCLO)

This function prohibits transmission as long as there is a signal on the receiving frequency.
The default is BCLO-OFF, which is the off position. By activating this function, the radio transmits
only when:
1. No signal is received (BUSY icon is gone) on the receiving frequency.
2. The tone-squelch is not opened by receiving the corresponding CTCSS tone.
3. As above, with DCS code.
Otherwise a beep sounds but the unit does not transmit even when the PTT is pressed.
1.
The [BCLO OFF] icon appears on the display.
2.
By rotating the main dial, the display changes
as shown and BCLO setting is changed.

Theft Alarm

(Please refer page 45 for details)
1.
The [SCR OFF] icon appears on the display.
2.
By rotating the main dial, the display changes
as shown and Theft Alarm is set ON/OFF.
3.
When Theft Alarm is set, [*] icon appears on
the display.
Parameter Setting Mode
(Refer page 27 for how to enter the setting mode.)
BELL OFF
BCLO OFF
SCR OFF
SCR DLY
BELL ON
BCLO ON
SCR ON
31