Table of Contents
Advertisement
5.
Releasing the PTT key will complete the
transmission and the unit will return to
the receive mode.
Pressing the DOWN key together with the PTT key will transmit the Tone
Burst signal.
NOTE
Pressing the UP key with PTT key to transmit the Auto-dialer tones.
If you press the PTT key while out of the transmission frequency
range, the [OFF] icon will appear on the display and no transmission
IMPORTANT
will occur.
1.
Press H/L key. The Output power
switches among High, Middle and low.
At middle power, the [ ], and at low power, the [ ]
illuminates. Nothing appears on the display at high
power. The default is high power.
The RF meter shows
power, and
at high power.
Transmission
Power
IMPORTANT
The Middle output setting is adjustable in set mode (P.54); however, RF-meter
NOTE
level indication will remain unchanged.
when transmitting at low
at middle power, and
The output power level cannot be changed during transmission.
The output power level cannot be changed during scanning.
Basic Operations
at low power
at middle power
at high power
33
Advertisement
Table of Contents
