Table of Contents
Advertisement
7
PARAMETER SETTING MODE
3.
Turn Main Dial to select the desired
setting .
On:In current channel,Press PTT to
transmit
OFF:In current channel,Press PTT is
invalid.
4. Press
key to confirm and exit.
Busy Channel Lockout
BCLO is to disable transmitting while RX signal is received. Once the
channel is busy and you press PTT, the radio will beep as warning and
get back to receiving.
1.
Press and hold
19
seconds to enter setting menu.
2.
Press
/
key to choose No.10
menu, LCD displays"LOCK--OFF".
3.
Turn selector knob to select the desired
setting.
BU: Enable
BCLO, Carrier lockout, transmitting is inhibited when
current channel receives a matching carrier.
RL: Enable
BTLO, transmitting is inhibited when current channel
receives a matching carrier but dis-matching CTCSS/DCS.
OFF:
Busy channel lockout is disabled.It can transmit in any
receiving status.
4.
Press
key to confirm and exit.
key for over 2
Editing Channel NAME
(Available only in Memory mode)
1.
In memory-mode, press and hold
for over 2 seconds to enter setting menu.
2.
Press
/
key to choose No.11
menu, LCD displays cursor and flashing.
3.
Turn Main Dial to select the desired letter, press
selected letter and enter into next edition,Press
forward edition.
4.
After edition, press
key to exit.
In Frequnecy display (VFO)mode, this menu is not available.
Reverse TX/RX
TX frequency turns to RX frequency & RX frequency changes to TX
frequency. CTCSS/DCS setting is respected also.
1.
Press and hold
key for over 2 seconds to enter setting menu.
2.
Press
/
key to choose No.12
menu, LCD displays "REV—OF".
3.
Turn Main Dial to select the desired
setting.
ON:Enable Frequency Reverse
OFF:Disable Frequency Reverse.
4.
Press
key to set and exit.
key
key to confirm
to return
Advertisement
Table of Contents
