Dell PowerEdge R730xd Owner's Manual page 50

Network Settings screen details
The Network Settings screen details are explained as follows:
Option Description
PXE Device n (n = Enables or disables the device. When enabled, a UEFI boot option is created for the
1 to 4) device.
PXE Device n Enables you to control the configuration of the PXE device.
Settings (n = 1 to
4)
Related Links
Network Settings
Viewing Network Settings
UEFI iSCSI Settings
You can use the iSCSI Settings screen to modify iSCSI device settings. The iSCSI Settings option is
available only in the UEFI boot mode. BIOS does not control network settings in the BIOS boot mode. For
the BIOS boot mode, the option ROM of the network controller handles the network settings.
Related Links
UEFI iSCSI Settings details
Viewing UEFI iSCSI Settings
UEFI iSCSI Settings
Viewing UEFI iSCSI Settings
Viewing UEFI iSCSI Settings
To view the UEFI iSCSI Settings screen, perform the following steps:
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish
booting, and then restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Network Settings.
5. On the Network Settings screen, click UEFI iSCSI Settings.
Related Links
UEFI iSCSI Settings
UEFI iSCSI Settings
UEFI iSCSI Settings details
The UEFI ISCSI Settings screen details are explained as follows:
Option Description
ISCSI Initiator Specifies the name of the iSCSI initiator (iqn format).
Name
ISCSI Device n (n = Enables or disables the iSCSI device. When disabled, a UEFI boot option is created
1 to 4) for the iSCSI device automatically.
50