Dell PowerEdge R730xd Owner's Manual page 152

Figure 70. Removing the NDC
1. captive screw socket (2)
3. captive screw (2)
5. network daughter card (NDC)
Next steps
1. Install the NDC.
2. If removed, install the expansion card(s) on the expansion card riser 2.
3. Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
Removing an expansion card from expansion card riser 2 or 3
Installing an expansion card into the expansion card riser 2 or 3
Installing the network daughter card
After working inside your system
152
2. connector on the system board
4. touch point (2)
6. back panel slot for Ethernet connectors