Dell PowerEdge R730xd Owner's Manual page 114

Figure 41. Removing and installing a processor
1. close first socket-release lever
3. processor
5. processor shield
7. socket
Next steps
1. Replace the processor(s).
2. Install the heat sink.
3. Reinstall the cooling shroud.
4. Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
Removing an expansion card from expansion card riser 2 or 3
Removing the cooling shroud
Removing a heat sink
Installing a processor
Installing a heat sink
Installing the cooling shroud
Installing an expansion card into the expansion card riser 2 or 3
114
2. pin-1 indicator of processor
4. slot (4)
6. open first socket-release lever
8. socket keys (4)