Table of Contents
Advertisement
When a local application is displayed, such as the personal tele-
phone directory for example, the "Phone" tab flashes to signal in-
coming calls in addition to the ring tone.
When you pick up the handset to dial or accept an incoming call, the
display indicator automatically switches to the "Phone" tab.
If configured, switching is performed automatically even if there is
no user intervention for a lengthy period (time can be configured
Æ page 149).
The Applications tab contains local applications:
Personal: personal telephone directory Æ page 124
•
Corporate: corporate telephone directory Æ page 139
•
Web Access: WAP browser Æ page 144
•
Service: the service menu for settings Æ page 146
•
The Menu key opens up the menu selection option where one of the local
applications can be activated and the "Applications" tab can be quickly ac-
cessed.
If the Status information softkey is displayed, system messages have
been received (flashing light = unread messages). To read the message(s),
click on the exclamation mark.
Using the Display keypad softkey, you can enter characters via the display
(Æ page 120).
Character input via the display keypad is useful if there is no external USB
keyboard available.
The current displays in the "Phone" tab and in the individual local ap-
plications are mutually independent.
This means that if you are in the personal directory, for example, and
the display changes to "Phone" because you have accepted an in-
coming call, the same display that was active before you accepted
the call reappears when you change back to the personal directory.
Descriptions of local applications Æ page 120 always assume that
the status of the relevant application is idle. If the status is unspec-
ified when the application is activated, press "Cancel", "Exit", or
"Menu", until the relevant idle status appears.
Basic operating instructions
17 17 17 17
Advertisement
Table of Contents
