Calibrating The Touchscreen - Siemens HOPATH 4000 Operating Instructions Manual

Step by Step

Calibrating the Touchscreen

By calibrating the touchscreen of your
optiPoint 600 office you can customize the dimension-
ing and alignment between your input and the image on
the display. This helps to eliminate problems in opera-
tion such as those caused by parallax.
Click on the Service tab.
Service
:
or Click on the menu item "Phone control" or enter the
1
code.
;
or Click on the menu item "Display settings" or enter the
2
code.
;
or Click on the menu item "Touchscreen calibration" or en-
2
ter the code.
Click on item 1.
Click on item 2.
Click on item 3.
Click on the softkey in the dialog box.
Save
Using local applications
147 147
147 147