Picking Up A Call In A Call Pickup Group; Ending A Call; Forwarding Calls - Siemens HiPath 500 Operating Instructions Manual

Conducting calls – the basic functions
Step by Step
> <
Group Pickup?
c or d Press and hold down the Talk key or press the Speaker-
> <
Forwarding on?
> <
1=all calls?
8

Picking up a call in a call pickup group

You can use your handset to pick up calls to telephones
within your call pickup group (set by the service engi-
neer). This is also possible when you are conducting a
call.
Prerequisite:
You hear that a telephone in your call pickup group is
ringing.
c Press and hold down the Talk key. The message "Call
for:" appears on the display.
Call the system menu.
Menu
[
Select the menu item and confirm.
p
Conduct the call.

Ending a call

k
a or
Press the On-hook key briefly or place the handset in
the charging shell.
The call charges are displayed, depending on the com-
munication system.

Forwarding calls

This function is for when you leave your desk for a while
and want certain calls to be forwarded to your new loca-
tion. The forwarding destination for internal calls can be
any internal or external phone number. The destination
number is usually an external phone number because
you can be reached internally anytime by means of your
handset.
Activating call forwarding
phone key.
Call the system menu.
Menu
[
Select the menu item and confirm.
either:
[
Select the menu item and confirm.