Operation; Display Settings - TCS ECOOS:FIVE Instruction Manual

EN

OPERATION

A ring tone signals an incoming call.
The green LED
the front-door station is displayed.
Speaking
Shortly press the speech button to accept the
call*.
* Third parties cannot listen in to the conversation or see the video images.
Shortly press the speech button again or the call
OFF button to end the call. Alternatively, press the
blue door release button and the call is termina-
ted after 4 seconds.
Automatic call cut-off is implemented after 2 minutes.
Door release
Shortly press the blue door release button to open
the door.
Ring tone mute
Press the call OFF button. In case of an incoming
call no acoustic signal sounds. The red LED
lights up.
Function key
Shortly press the function key to send the control
function 8.
Image activation
Shortly switch the image button to display the vi-
deo image of the front-door station.
See also additional functions.
OSD menu
This button you need to get to the main menu.
See page 5 and 6.
Menu navigation
These buttons you need to set the image and ring
tone parameter.
See page 5, 6 and 7.
10
Service Fon. +49 4194 9881-188 | Fax +49 4194 9881-188 | E-Mail hotline@tcsag.de
lights up and the video image of
SETTING VIDEO IMAGE

Display settings

The video image is displayed immediately after
pressing the image button
a door call. Optionally you can presss the speech
button to receive the sound signal additionally to
the video in standby mode (speaking and video off).
Setting brightness, contrast and color saturation
can be implemented in the user settings in standby
mode (speaking and video off). The conversation vo-
lume can only be adjusted by a qualified electrician.
1. Shortly press the menu button
menu is displayed.
2. Press the image button
ton to select the menu System Settings. Confirm
the selection by pressing the speech button
3. Press the image button
OFF button to select the menu User Settings.
Confirm the selection by pressing the speech but-
ton .
4. Confirm the menu Config Parameter by pressing
the speech button . Shortly press the image but-
ton or the call OFF button
parameter value. The changes are displayed imme-
diately in the video image. Press the speech button
to get to the next parameter.
5. Press the menu button
or after receiving
. The main
or the call OFF but-
.
again or the call
to change the
to save the settings.