Toro 04042 Operator's Manual page 26

with black. As power is used, boxes will be filled with
white starting from the right and proceeding to the left
as the battery drains. When only one box is still black,
the battery pack is almost out of power and you should
immediately proceed to charge the battery.
•
Fault log indicator—this icon indicates that there is a
current fault log to review.
•
Speed control setting—the bars turn black from left to
right the faster you set the speed control. When all bars
are filled with white, the machine is at Zero speed.
•
Menu access/back button—press this button to access
the InfoCenter menus. You can also use it to back out of
any menu you are currently using.
•
Down button—use this button to scroll down menus.
•
Right button—use this button to open a menu where a
right arrow indicated additional content.
Note: The purpose of each button may change depending
on what is required at the time. Each button will be label with
an icon displaying its current function.
Using the Menus
To access the InfoCenter menu system, press the menu access
button while at the main screen. This will bring you to the
main menu. Refer to the following tables for a synopsis of
the options available from the menus:
Main Menu
Menu Item Description
Faults The Faults menu contains a list of the recent
machine faults. Refer to the Service Manual
or your Authorized Toro Distributor for more
information on the Faults menu and the
information contained there.
Service The Service menu contains information on
the machine such as hours of use and battery
usage and status.
Diagnostics The Diagnostics menu lists various states that
the machine currently has. You can use this
to troubleshoot certain issues as it will quickly
tell you which machine controls are on and
which are off.
About The About menu lists the model number,
serial number, and software version of your
machine.
Settings The Settings menu allows you to customize
the InfoCenter display.
Service Menu
Menu Item Description
Hours Lists the total number of hours that the
machine has been turned on.
Mow Time
Lists the total number of hours that the reel
has been turned on.
Power Use Lists the instantaneous power delivered by
the battery in Watts.
Lists the current battery charge as a percent
Battery Charge
of capacity.
Battery Current Lists the instantaneous current delivered by
the battery in Amps.
Battery Volts Lists the battery potential in Volts.
Energy Lists the total energy delivered by the battery
over its entire life in Watt-hours.
Diagnostics Menu
Menu Item Description
Key On Indicates whether the ignition key is on or off.
Indicates whether the ignition key is in the
Key Start
Start position or not..
PBrake Latch Indicates whether the parking brake latch is
on or off.
EZ Turn Indicates whether the EZ-Turn circuit is open
or closed.
Traction Indicates whether the traction lever is on or
off.
Reel Enable Indicates whether the reel is engaged or not.
Throttle Indicates the throttle control setting in Volts
(used to calculate the target RPM).
Target RPM Lists the desired motor RPM as indicated by
the speed control setting.
Motor RPM Lists the actual motor RPM.
12V Supply Lists the sensor supply voltage #1 of the
controller.
5V Supply Lists the sensor supply voltage #2 of the
controller.
CAN Bus Lists the machine communication bus status.
About Menu
Menu Item Description
Model Lists the model number of the machine.
SN Lists the serial number of the machine.
S/W Rev Lists the revision number of the machine
software.
26