Safety And Instructional Decals - Toro 30393 Operator's Manual

• Be sure that the machine is in safe operating
condition by keeping nuts, bolts, and screws tight.
Check the fan shaft bearing mounting bolts and
nuts frequently to be sure that they are tightened to
specification.
• Make sure that all hydraulic line connectors are
tight and all hydraulic hoses and lines are in good
condition before applying pressure to the system.
• Keep your body and hands away from pin hole leaks
in hydraulic lines that eject high pressure hydraulic
fluid. Use cardboard or paper to find hydraulic
leaks. Hydraulic fluid escaping under pressure can
penetrate skin and cause injury. Fluid accidentally
injected into the skin must be surgically removed
within a few hours by a doctor familiar with this
form of injury or gangrene may result.
• Before disconnecting or performing any work on
the hydraulic system, all pressure in the system must
be relieved by stopping the engine and lowering the
blower to the ground.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of
potential danger. Replace any decal that is damaged or lost.
1. Warning—read the Operator's Manual and receive training.
2. Warning—wear hearing protection.
3. Thrown object hazard—wear eye protection and keep
bystanders a safe distance from the machine.
4. Cutting hazard of hand or foot—wait for moving parts to stop.
1. Point of rotation
98-3110
98-3111
• If the engine must be running to perform a
maintenance adjustment, keep hands, feet, clothing,
and other parts of the body away from the fan and
other moving parts.
• Do not overspeed the engine by changing the
governor settings. To be sure of safety and accuracy,
have an Authorized Toro Distributor check the
maximum engine speed with a tachometer.
• The engine must be shut off before checking the oil
or adding oil to the crankcase.
• To ensure optimum performance and safety, always
purchase genuine Toro replacement parts and
accessories to keep the machine all Toro. Never
use "will-fit" replacement parts and accessories
made by other manufacturers. Look for the Toro
logo to ensure genuineness. Using unapproved
replacement parts and accessories could void the
warranty.
1. Cutting/dismemberment hazard, fan—stay away from
moving parts.
1. Grease
1. Warning—do not touch the hot surface.
4
93-9083
58-6520
106-5517