Checking The Engine-Oil Level; Breaking In A New Machine; Think Safety First - Toro 74568TE Operator's Manual

Grandstand mower with 122 cm turbo force cutting unit
Hide thumbs Also See for 74568TE:
Table of Contents

Advertisement

of varnish deposits in the fuel system, use fuel stabilizer
at all times.
Filling the Fuel Tank
Note: Do not fill the fuel tank completely full. Fill the fuel
tank to the bottom of the filler neck. The empty space in the
tank allows the gasoline to expand.
1. Park the machine on level ground.
2. Shut the engine off and set the parking brake.
3. Clean around the fuel-tank cap.
4. Fill the fuel tank to the bottom of the filler neck.
Ensure there is empty space in the tank to allow the
gasoline to expand
1
2
4

Checking the Engine-Oil Level

Before you start the engine and use the machine, check
the oil level in the engine crankcase; refer to
Engine-Oil Level (page
35).
(Figure
7).
3
5
G012565
Figure 7
Checking the

Breaking in a New Machine

New engines take time to develop full power. Mower decks
and drive systems have higher friction when new, placing
additional load on the engine. Allow 40 to 50 hours of
break-in time for new machines to develop full power and
best performance.

Think Safety First

Carefully read all the safety instructions and decals in the
safety section. Knowing this information could help you or
any bystanders avoid injury.
The use of protective equipment for eyes, hearing, feet and
head is recommended.
CAUTION
This machine produces sound levels in excess of
85 dBA at the operator's ear and can cause hearing
loss through extended periods of exposure.
Wear hearing protection when operating this
machine.
The use of protective equipment for eyes, ears, feet, and head
is recommended.
1
1. Wear safety glasses
17
G009027
Figure 8
2. Wear hearing protection
2

Advertisement

Table of Contents
loading

Table of Contents