Setup; Connecting The Battery - Toro 44538 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
Media and Additional Parts
Description
Parts Catalog
Operator's Manual
Engine Manual
Operator Training Material
Remote control
Certificate of compliance
Note: Determine the left and right sides of the machine
from the normal operating position.
1

Connecting the Battery

Parts needed for this procedure:
A/R Petroleum jelly (not supplied)
Procedure
1. Remove the clips securing the battery cover to the
battery box (Figure 3).
Description
Petroleum jelly (not supplied)
Debris blower assembly
Hitch
Bolt (3/8 x 3 inches)
Flange nut (3/8 inch)
Hitch clevis
Bolt (5/8 x 4–1/2 inch)
Lock nut (5/8 inch)
Hitch pin
Clevis
Qty.
A/R
1
1
2
2
1
2
2
1
1
Qty.
1
Read before operating.
1
1 Use to reference engine operation and maintenance
1 View before operating the machine
1 Use to remotely operate blower
1 Ensure CE compliance.
2
1
1. Battery box
2. Battery cover
7
Use
Connect the battery
Mount the hitch to the debris blower
Connect the blower to the tow vehicle
Use
3
G02071 1
Figure 3
3. Battery clips