Automatic Stability Control Asc - BMW R 1200GS Rider's Manual

Activating the ABS
4
function
66
z
Press and hold down button 1
until the ABS warning light
changes status.
ABS warning light goes out;
if self-diagnosis has not
completed it starts flashing.
Release button 1 within two
seconds.
ABS warning light remains
off or continues to flash.
The ABS function is activated.
You also have the option of
switching the ignition off and
then on again.
NOTICE
An ABS fault has occurred if the
ABS warning light shows when
the motorcycle accelerates to a
speed in excess of 5 km/h after
the ignition was switched off and
then on again.
NOTICE
See the section entitled "En-
gineering details" for more in-
formation on brake systems with
BMW Motorrad Integral ABS.
Automatic Stability
Control ASC
Deactivating the ASC
function
Switching on ignition (
Press and hold down button 1
until the ASC warning light
changes status.
NOTICE
You have the option of deactiv-
ating the ASC function while the
motorcycle is on the move.
The ASC warning light
shows.
Release button 1 within two
seconds.
The ASC warning light still
shows.
45).