Table of Contents
Advertisement
feedback on control intervention
even after the critical situation
has been dealt with.
ASC self-diagnosis not
completed
The ASC warning light
slow-flashes.
Possible cause:
ASC self-diagnosis not
completed
The ASC function is not avail-
able, because self-diagnosis
did not complete. (The motor-
cycle has to reach a defined
minimum speed for the wheel
sensors to be checked: min
5 km/h)
Pull away slowly. The ASC
warning light must go out
within a few metres.
If the ASC warning light contin-
ues to flash:
Seek the advice of a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
ASC deactivated
The ASC warning light
shows.
Possible cause:
The rider has switched off the
ASC system.
Switch on the ASC function.
ASC fault
The ASC warning light
shows.
Possible cause:
The ASC control unit has detec-
ted a fault. The ASC function is
not available.
You can continue to ride. Bear
in mind that the ASC function
is not available. Bear in mind
the more detailed information
on situations that can lead to
an ASC fault (
111).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ESA fault
The "General" warning light
shows yellow.
ESA!
appears on the display.
Possible cause:
The ESA control unit has detec-
ted a fault. In this condition, the
motorcycle has too much damp-
ing and is uncomfortable to drive,
especially on roads in poor con-
dition.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
3
37
z
Advertisement
Table of Contents
